Thus, we need to check the MAC address of the client and type it manually during the MAC Clone process. Why can't I select Use Client MAC Address to do the MAC Clone?ĭue to the WAN/LAN auto-sensing design, Halo will not assign a valid IP address to the client connection on the other Ethernet port if it has no internet access. Then you can test if the Halo is working or not. Enter the MAC address of the computer manually in the form of XX-XX-XX-XX-XX-XX and then tap the Save button to save the settings. Step 4: Enable MAC Clone, then you will see two options, Use Client MAC Address and Use Custom MAC Address. Connect your phone to Halo’s Wi-Fi, and go to the More > Advanced >MAC Clone page on the Halo App. Step 3: Disconnect the computer to the modem and then connect the modem to the main Halo. Step 2: Refer to the link to check the MAC address of the computer, which is also called the Physical address, and then write down its MAC address. If the computer has no internet access, it’s suggested to contact your ISP. Make certain the computer has internet access when connecting to the modem. Step 1: Disconnect the main Halo to the modem, and connect your computer to the modem. Situation 1: No old router, the PC has internet when connecting to the modem directly, but the main Halo does not. If you use Halo to share your internet connection, the modem may still register the MAC address of your computer or the old wireless router, in that case, it's necessary to configure MAC Address Clone on the Halo so that it has internet access. Some ISP may register the MAC address of your computer or your old wireless router when dialing up the internet for the first time via modem.

Clone mac